Kyosho Mini-Z MR-04 RWD Chevrolet Corvette C8-R Chrome / Yellow 20TH W-MM KT531P 2.4ghz 32356CRY
Mini RC Car 1/28 Scale Kyosho Mini-Z MR-04 RWD Chevrolet Corvette C8-R Chrome / Yellow 20TH W-MM KT531P 2.4ghz 32356CRY
The Mini-Z RWD is ReadySet format (ready to run) together with a 2.4 GHz FHSS KT531-P transmitter.
The Mini-Z MR-04 RWD is the latest generation of 1/28 rear wheel drive mini rc cars.
The chassis and weight distribution have been optimized to lower the center of gravity as much as possible. The new front end allows for a variation of the suspension camber and allows 2 tread configurations to adapt the car to the track conditions.
The Mini-Z MR-04 RWD is ReadySet format (ready to run) together with a 2.4 GHz FHSS KT531-P transmitter.
This new line is intended to replace the Mini-Z MR-03 RWD range.
The factory-assembled chassis, the synchronized radio unit and the painted and decorated bodywork.
As always, you will only need to purchase the batteries for your radio and the batteries for the chassis. (8 AAA batteries (R3), 4 for the radio 4 for the chassis).
Numerous bodies are available in a wide variety of colors.
● The new series includes the newly developed Syncro KT-531P transmitter with multiple configuration options.
● Newly developed control board offers improved steering feel.
● Fully factory-finished body.
● Mounted with bearings on the transmission, including 7 bearings, previously an optional upgrade.
● Compatible with all MINI-Z Racer body styles.
● Front suspension incorporates VCS that optimizes camber angle.
● Compatible with optional gyro unit (MZW711). Gyro effect can be adjusted on the chassis.
Technical specifications:
■Length: 173mm
■Width: 78mm
■Height: 45mm
■Wheelbase: 98.0mm (LL)
■Chassis: RWD - MR-03)
■Front Wheel Offset: Narrow +3.0mm (for RWD)
■Rear Wheel Offset: Wide +3.0mm (for RWD)
■R/C System: Syncro KT-531P
Readyset Contents:
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
Required for Operation:
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Grade Comments (0)