Performa P1 HMX 8 Controller 180A Sensor 4S 1/8 Buggy / Truggy / GT PA9375

Radical Concept
Performa is a brand for Elite Racers. Our goal is to produce the best 1/8 controllers and motors, and re-define the racer experience with a radical “next level” controller/motor combo. With the Performa Racing HMX 1/8 Combo we are proud to demonstrate that we have achieved our goal.

Nitro racing is popular because it’s simple, racers chose a 3 Port, 5 Port or 7 Port engine depending on the track, tune the needles to have good carburation, and drive. That’s all. Performa has now adapted that simplicity to electric racing. Controllers and motors used recently in 1/8 racing have hundreds (even thousands) of complex settings. While trying to understand and adjust the complex settings, many racers get lost and end up with tuning that is below optimal performance. The new Performa HMX Controller/Motor Combos deliver simplified settings using the Nitro concept, you select from 3 different pre-defined settings based on the track condition. No need to have a complex program box or a computer. The 3 settings have been tuned by our engineering team together with our World Champion Drivers to deliver maximum performance and simplicity. You can change the settings by simply pressing a button on the switch. For racers that want to dig deeper and fine tune the settings, we will offer Performa PC software that will allow you to change the parameters, within guidelines that ensure you don’t get lost and keep you in the optimal performance range.

Radical Technology
It became clear during research and development that making universal controllers for universal motors limits maximum performance, and is not the right way to reach our goal of making radical “next level” controllers and motors for Elite racers. The new Performa HMX Controller features a very innovative type of sensor technology developed for optimal performance when used only with Performa Radical HMX 690 motors. It delivers maximum power and smooth power delivery, radical “next level” performance that goes beyond what a compromised universal system can provide.

Radical Solutions
The Performa HMX Controller is designed and manufactured without compromise. Each controller is assembled in Geneva Switzerland, it is a high end unit produced in limited quantities for Elite Racers. The circuit boards are made in one of the most sophisticated factories, every board is scanned using laser analyzing devices for each soldering joint and every component. The all-aluminum case has been designed for minimum footprint and optimized cooling. Performa external capacitors have been chosen to obtain Radical Performance. Featuring 2 boards of 4 Panasonic capacitors to provide radical “next level” performance.

Radical Testing
The Performa Racing HMX 1/8 Combos have been tested for more than two years by our engineering team, and for a year one by David Ronnefalk, IFMAR World Champion. Recently David made a demonstration of the radical performance by winning the famous 2019 DNC race in the USA.

To configure a combo to your needs, check the box of available options that you will see on the right side of the screen in the PC version and at the bottom of the screen in the mobile version.

We put at your disposal the motors and programming card compatible with this ESC.

To answer your questions contact us.

Features:
Application:  1/8
Compatible motors: Performa HMX Magnet Sensor
Continuous Current: 180A
Max Peak Current: 800A
Memories: 4
Mode: 
- Brake
- Forward
- Reverse
Sensor: Sensor
Type: Brushless
Wire gauge: 12AWG
Height: 38mm
Length: 41mm
Width: 42mm
Weight: 104g