Liquid Mask - 0.5Kg. - 16 oz Bittydesign BD-LM16

Bittydesign you have the solution to the problems of painting lexan bodywork in rc cars, with the liquid mask you will get the best results and perfect lines painting with airbrush or spray.

• No masking tape
• Straight cuts
• Easy to apply and remove
• Applicable with brush or airbrush

Product characteristics:

• Liquid Mask is ready to use, no dilution is required.
• It is water-based without solvent, not harmful to health. You can use it safely even at home.
• Dries quickly when subjected to a blast of hot air.
• Once the package is opened, if stored properly, it can last for several months.
• With the 16oz format, about 20 1/8 buggy bodies and about 12/13 1/10 touring bodies can be prepared; with 32oz bottle double quantities

The aspects and advantages of Masking Liquid are easily found:

• Incredible time saver, the liquid extraction is really fast.
• Possibility of easily reaching all points of the body surface, even the edges and areas where the lexan has articulated shapes.
• Less force from the cutter blade
• Greater cutting precision due to the fact that the liquid, once dry, is semi-transparent and makes it easier to follow the lines of the drawing
• No residue when removing the liquid (it can happen, however, if you continue to use unsuitable tape paper that after adhesive removal some glue residue remains on the airbrushing surface - with Liquid Mask this will never happen)
• Higher airbrushing precision, color spots are no longer a problem

How to use:

• We will clean the bodyshel
• Apply 3 very soft coats with a brush or airbrush.
• Let dry and trim gently with a cutter.
• Remove the layers by always painting from darker to lighter color.