Your cart
There are no more items in your cart
Digital Servo - HV Low Profile Power HD PGC-D12 12.5Kg 0.059s SSR Mode / Reverse Wire HD-PGC-D12
Notice Of Availability!
€74.37
Our professional and experienced R&D team is striving for developing superb performance, most reliable and most compatible products offering ultimate facileness and fun to end users.
In POWER HD, each single product is checked and tested through a series of strict and accurate QC (Quality Control) process by leading edge technology facilities.
We understand only the best can serve our clients the best.
Description:
Power HD have their fresh D12 reverse receiver wire low-profile servo, specific for 1/10 touring cars & drift cars.
It features an all-aluminium case and distinctive laser pattern on the bottom, durable titanium and steel gears, a powerful coreless motor and weighs only 55g, support SSR mode.
With receiver wire leaving the case on the opposite side of the output gear–and thus on the inside of the chassis in most cases – wiring can be carried out much neater compared to standard servos that always have the wire on the “outside” of the chassis. Therefore the servo is the ideal choice especially for 1/10th touring cars and drift cars, as it make for more tidy and safer wiring.
It is usable with 6.0V to 7.4V input, offer a torque of up to 12.5kg-cm at a speed of down to 0.059s.
Power HD PGC-D12 Features:
● Escale: 1/10 Touring & Drift Cars
● Case: Alu
● Size: 41x20x26.3mm
● Weight: 55 gr
● 6.0V torque: 9.5 kg / cm
● 7.4V torque: 12.5 kg / cm
● Speed under 6.0V: 0.068 s / 60 °
● Speed under 7.4V: 0.059 s / 60 °
● Sprockets: Titanium & Steel
● Reverse Wire
In POWER HD, each single product is checked and tested through a series of strict and accurate QC (Quality Control) process by leading edge technology facilities.
We understand only the best can serve our clients the best.
Description:
Power HD have their fresh D12 reverse receiver wire low-profile servo, specific for 1/10 touring cars & drift cars.
It features an all-aluminium case and distinctive laser pattern on the bottom, durable titanium and steel gears, a powerful coreless motor and weighs only 55g, support SSR mode.
With receiver wire leaving the case on the opposite side of the output gear–and thus on the inside of the chassis in most cases – wiring can be carried out much neater compared to standard servos that always have the wire on the “outside” of the chassis. Therefore the servo is the ideal choice especially for 1/10th touring cars and drift cars, as it make for more tidy and safer wiring.
It is usable with 6.0V to 7.4V input, offer a torque of up to 12.5kg-cm at a speed of down to 0.059s.
Power HD PGC-D12 Features:
● Escale: 1/10 Touring & Drift Cars
● Case: Alu
● Size: 41x20x26.3mm
● Weight: 55 gr
● 6.0V torque: 9.5 kg / cm
● 7.4V torque: 12.5 kg / cm
● Speed under 6.0V: 0.068 s / 60 °
● Speed under 7.4V: 0.059 s / 60 °
● Sprockets: Titanium & Steel
● Reverse Wire
HD-PGC-D12
New product
No reviews
Tap to zoom
Grade Comments (0)